Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ACL and SNMP on CSS

access-list 30 remark John Doe

access-list 30 permit 10.3.2.15

access-list 30 deny any log

snmp-server community CSS RW 30

The above configuration is what we currently have on our routers and switches. Could someone help me convert the above into configs that could be placed on a CSS? I am familiar with configuring the basic SNMP on CSS but can't figure out how to add ACL to it. Is this config possible on CSS at all?

Thanks

2 REPLIES
Cisco Employee

Re: ACL and SNMP on CSS

there is no option to limit snmp request with an ACL on the CSS.

But, you can filter the SNMP traffic with an interface ACL using something like this

acl 1

clause 10 permit udp 10.3.2.15 destination x.x.x.x eq 161

clause 20 deny udp any destination x.x.x.x eq 161

clause 99 permit any any destination any

apply all

Gilles.

New Member

Re: ACL and SNMP on CSS

Giles,

Your suggestion looks like the only shot that I have at this moment. Thanks!

125
Views
0
Helpful
2
Replies