ACNS 4.0.1 - ECDN - live streaming questions (CDM, CE)
working with ECDN (CE,CDM) running ACNS4.0.1 and trying various configurations for the live streaming, i have the following questions:
1] I have enabled the WMT Server on the two CEs with a license key. I would like to do the same on my CDM, but the key seems to be invalid. Could you tell me where I could find it ?
In fact, I guess that there is WMT server on the CDM but not sure, as i know there is a REALG2 server on the CDM because I tried it.
2] I would like to do live using the ECDN solution. I have already set up my ECDN network (1 CDM and 2 CEs), and a webcam is the source of the my live stream, which is then encoded via RealProducer and streamed by the Real server. This works fine for the moment, but I would like now to incorporate this with the ECDN. I saw that with ACNS 4.0 it was possible to
- for Real do Server (on demand), Proxy and Live splitting
- for WMT do Server (on demand) (Proxy and Live splitting programmed for ACNS 4.1)
My problem is that in order to use the ECDN, I need to import a file in the CDM in order to get a CDM created URL that I could link on a web page. But I do not manage to find on my source real server a file called live.rm that I could import. Do you know how to do ? And in fact if this is a possible thing to do ? otherwise I can do 3]
3] When dealing with Real Proxy, activating rtsp proxy on the CE is working fine, I wanted to know if I could do the same thing on the CDM and if so where can i find the license-key (the one I am using on the CEs does not work on the CDM)
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
I am working on designing a large ECDN at my company. I would like to talk to you about any details or insight you have relating to ECDN. Can I contact you or you can email me at firstname.lastname@example.org
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...
Cisco Documents are usually accurate, but when it came to the document
on Cisco APIC Signature-Based Transactions it was slightly off the mark.
This document is for those novices to API like me who cant seem to
figure out how to go about performing signat...