We have deployed ACNS on a WAE-612 for transparent proxy via WCCP. WCCP is active on a 6509 and redirects all outbound HTTP/HTTPS traffic through the WAE. The WAE is also configured as a proxy that will accept proxy connections on port 8080.
We have an issue where ACNS/WCCP will work for weeks with no issues. At some point several major sites, such as http://www.cisco.com are no longer reachable, but other sites are. If you configure the browser to hit the WAE as a proxy on port 8080 the sites are then accessible. Eventually the sites will begin working again through WCCP transparent proxy.
This appears to be an issue with WCCP. Anyone else experience issues like this?
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...