Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
New Member

ANM, ACE module device type

I have a pair of ACE modules installed and maintained through ANM.  We

started with ANM 2.X and recently upgraded to 3.0.

The ACE modules were running code A1(6.3) and are now on A2(2.3).

ANM is identifying the devices as Device Type ACE v1.0, and device types

seem to limit the features that ANM exposes for configuration.

The GUI does not expose the HTTP/SSL rewrite features in Expert mode, but I

can configure the devices in the CLI.

I have been unable to find an info on how devices are identified, or if they type

can be changed..

The exact module installed is a ACE20-MOD-K9.  Can anyone shed some light

on if this is an 'ACE V1.0' and if not, how to convince ANM of the correct type?

Hall of Fame Super Silver

Re: ANM, ACE module device type

Just a thought - when you upgraded did you change the default www user password on the ACEs? I remember the upgrade instructions instructing that this step was necessary to allow manipulation of the configuration via xml (which I believe the ANM tool requires to exercise its full functionality).

CreatePlease to create content