I wish to clarify if the % reduction with or without passhrough traffic statisitics as viewed from central manager actually corresponds to actual percentage bandwidth reduction as seen by WAN bandwidth management tool like MRTG. FLUKE e.t.c because the setup i have does not correspond.
From the CM I have about 60% reduction meanwhile the the Fluke slight change in bandwidth and most if not all of the traffic is TCP and are monitored by the fluke.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...