Basic ACE Blade HTTP access

[mcroberts]

I have JUST started using the ACE blade and have upgraded to c6ace-t1k9-mz.A2_1_1a.bin. I have configured access to the device via ssh, http, https, etc... When I access the server via http/https, I only get a generic web page telling me the version of the device. I don't actually get a web page where I can configure anything. Any ideas?

[Gilles Dufour]

The GUI comes in a separate device called ANM.

If you have the ACE appliance (not the blade) the ANM is onboard and can be accessed via https.

Gilles.

[mcroberts]

I have the blade for the 6500. Do you know what else I need to get the ANM with that?

[Gilles Dufour · Accepted solution]

The ANM is a product.

You need to buy it from your local vendor or from our website.

http://www.cisco.com/en/US/docs/net_mgmt/application_networking_manager/1.2/installation/guide/IG_prep.html

It's a software running under linux.

Gilles.