Application Networking

Hello,I have installed SSL cert and two chain cert, I used IE to test, it is ok, but when I used Verisign installation Checker to test, it show invalid chain status, so I want to import another two coorect chain cert, but failed, it showed "error:Fil...

We have Currenlty Deploying the ACE in Our Enviornment. After Reading One-armed Mode & Routed Mode I have come with Pros & Cons of both approach & I wanted to make sure my understanding is correct . I also wanted to find how others are deploying int...

Hello Friends,I have configured Cisco ACE 4710 with multi-hop (Configure NAT) and it works OK. The real servers have apache up, but when i access to VIP 50.80.1.100 vi http://50.80.1.100 the logs in the real servers is about 50.70.1.20 (NAT IP Addres...

There are 2 real servers in a server farm. Is there a way to route a connection from a particular cilent to the a particular real server in the serverfarm through the VIP.

Hello, I am having an issue with a WAF.  My topology is as follows:  (internet) -> (ACE) -> (WAF) -> (ACE) -> (Server). On the WAF I get this error:  "Parser error: Document must start with '<' character. at byte 0 ".When the WAF is bypassed, the app...

hi,When we send same zipped file to branches, waas does not cache that file, without zipping waas caches the file. Is there any restrictions for zip file?

I have my certificate and my key pair loaded onto the ace.  What command do I need to execute to pair them?

Dear all,I hace an ACE Module configured in Multiple Routed Contexts.My cust wants to configure some NAT Feature that prevents the real server IP Address appear outside the ACE. They want that the only IP address outside the ACE will be the Virtual I...

The modules Waas NME-WAE-502 and 302 snmp support? The link down show the appliances support but not have nothing about modules.http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v407/configuration/guide/SNMP.htmlThank you!Igor

Had to reinstall the vCM after some crash. Switch the standby vCM to primary. That works fine. After reinstalling the previous primary vCM, I can't get it to register on the primary vCM. When configuring "cms enable" it says: "Registration record for...