Application Networking

We are going to build a WAAS network, and are going to do HA at each location. I see the config examples talking about load balancing...but is there an HA design guide...

Hi. We have a CSS setup with only one ethernet port(eth1) ,one arm configuration.This port is ingress aswell as egress for loadbalancing traffic.It takes in client request from various sources and load balances to services on the same network.For E.g...

Dear Experts,While entering write memory i am getting the following error "Error in opening startup config, error 2Write memory failed for context Admin"Please suggest what to do The version on ACE appliance is "c4710ace-mz.A3_2_2.bin"

I have a rserver configured with the following line.webhost-redirection https://%h/%p 301I encounter a problem if I enter something such as http://mywebsite.abcd.comThe site does not redirect to https. However if I retype adding a / at the end every...

Hi allI have a small problem with our 4710 (ver A3 2.2). We have enabled compression for a site, and have removed the excluded MIME types for .js and .css files from the "default-compression-exclusion-mime-type" class-map. However, all .js files are ...

Hi,Situational question, since CM is required on the WAAS deployment, what will happen to the WAAS environment in case the CM fails? Would the acceleration still be the same? or several protocol will still be accelerated or the WAAS whole setup will ...

I have a pair of ACE appliance setup to failover on the FT TRACK of a vlan. I tried disconnecting the primary ACE from network and failover did not occur and the backup did not takeover. Also indicated in the FT group summary.Attachemnts are FT confi...

I purchased a WAE-612 with ACNS software, but it doesn't recognize any disk i put in slot 0, box0. In fact, the bios boot gives me:Slot Box Dev SAS Address Vendor Model Rev Size-----------------------------------------------------...

Hi all,we have a Checkpoint FW and two WAE-674 in our Branch. In a other Branch we have a WAE-574. We have a Problem with the Sequence Number on our FW when we use the Transparent Mode.Is this Problem fixt or have another people the same Problem ?I h...

Hi,we have 20+ WAAS devices in our network environment, all are running on Cisco Wide Area Application Services Software (WAAS) & the device mode is : application-accelerator.Now we brought the new WAAS which is came with the image as Application and...

I have a request to loadbalance Microsoft Communicator. Communicator has multiple ports that need loadbalanced. Is it as easy as creating a server farm with real servers and creating multiple virtual farms with each port (example below)?serverfarm ...

Can it be done and anyone have sample script to examine IPADDRESS source range 10.x.x.x or maybe gateway address, ensure return traffic goes 10.x.x.x ? Then traffic source Internet, goes back internet. Have a case where we need to give HTTPS access...