Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

CacheEnine as a proxy

Hi.

Need your help. My customer wants to implement his CE 565 just like a proxy. He will have a private ip on one interface and a public ip on the other interface. Is it possible to have the clients specifying the ip of the CE in their browsers proxy window. If possible, how could i put some restrictions on specific users or ip's.

regards

ZJ

1 REPLY
Cisco Employee

Re: CacheEnine as a proxy

ZJ,

The CE 565 can be setup as a non-transparent proxy for your users. Please refer to the following link that will explain how this works:

http://www.cisco.com/univercd/cc/td/doc/product/webscale/uce/acns55/55ldg/exdeploy.htm#wp1103942

Typically, you will use the CE's address as the proxy server's address on your browser's proxy window. You will need to specify a port in order to channel the proxy requests from the users to the CE. 8080 is used by default.

http://www.cisco.com/univercd/cc/td/doc/product/webscale/uce/acns55/55ldg/config.htm#wp1412786

Additionally, you can integrate your proxy solution with a authentication and/or URL filtering, where you can have control of users and content going through your CE.

http://www.cisco.com/univercd/cc/td/doc/product/webscale/uce/acns55/55ldg/urlfiltr.htm

http://www.cisco.com/univercd/cc/td/doc/product/webscale/uce/acns55/55ldg/conauth.htm

Hope if helps.

115
Views
5
Helpful
1
Replies