Can CSS11000 work with all interfaces in same subnet?
I would like to know if I can put a CSS11000 into one IP-subnet only so that the input interface is in the same subnet as the output server-interfaces. This would make my addressing much easier and also a failover if the CSS11000 is dead.
PS: CSS11000 should act as load-balancer and should detect a dead server.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...