Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can I use ethernet ports in backup CSS5-SCM-2GE

Could anyone advice me - can I use 1GE ethernet port on second SCM module in slot2?

# sh chassis

1 CSS5-SCM-2GE primary

2 CSS5-SCM-2GE backup

Any comments will be appreciated

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: Can I use ethernet ports in backup CSS5-SCM-2GE

Hi,

Unfortunately, the secondary SCM on a CSS11506 is backup and would not be online until the primary fails. This means that it cannot be used at all while the primary SCM is working properly. Check this link as reference:

http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/11500fru/scm_2gen.pdf

I hope this helps. Thanks!

Regards,

Jose Quesada.

3 REPLIES
Bronze

Re: Can I use ethernet ports in backup CSS5-SCM-2GE

Hi,

Unfortunately, the secondary SCM on a CSS11506 is backup and would not be online until the primary fails. This means that it cannot be used at all while the primary SCM is working properly. Check this link as reference:

http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/11500fru/scm_2gen.pdf

I hope this helps. Thanks!

Regards,

Jose Quesada.

New Member

Re: Can I use ethernet ports in backup CSS5-SCM-2GE

Jose,

Great thanks for the reply. So, it also can not replace the SAM module to do similar work, right?

Please advice.

Bronze

Re: Can I use ethernet ports in backup CSS5-SCM-2GE

Hi,

You are right, the secondary SCM would not be used at all. So it cannot replace the SAM module.

I hope you find this information helpful. Thanks!

Regards,

Jose.

125
Views
0
Helpful
3
Replies
CreatePlease to create content