Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cannot get my VIP to work (New To ACE)

Hello,

I am trying to configure my new ACE blade with a test. I've created two VIPs and they are active. But when I try to telnet to the VIP IP and port it fails. I do get this message in my syslog:

Jun 1 08:08:49 10.7.1.250 Jun 1 2007 08:08:49 : %ACE-6-302022: Built TCP connection 0x18 for vlan21:172.16.14.18/1508 (172.16.14.18/1032) to vlan21:10.7.1.244/9000 (10.3.19.1/9003)

So it looks like it should work.

I can ping the VIP IP from the pc I am trying to telnet from. But from the ACE Blade itself I cannot ping the VIP IP. I can ping the rserver IP from the ACE.

I have the VIP applied to the VLANs with Service-policy input

show service-policy

Policy-map : L4_LB_VIP_COSRCVIP1

Status : ACTIVE

-----------------------------------------

Interface: vlan 21

service-policy: L4_LB_VIP_COSRCVIP1

class: L4_VIP_cosrcvip1-9000

loadbalance:

L7 loadbalance policy: L7_VIP_LB_COSRCVIP1-9000

VIP Route Metric : 77

VIP Route Advertise : ENABLED

VIP ICMP Reply : ENABLED

VIP State: INSERVICE

curr conns : 3 , hit count : 5

dropped conns : 0

client pkt count : 6 , client byte count: 384

server pkt count : 0 , server byte count: 0

class: L4_VIP_cosrcvip1-9100

loadbalance:

L7 loadbalance policy: L7_VIP_LB_COSRCVIP1-9100

VIP Route Metric : 77

VIP Route Advertise : ENABLED

VIP ICMP Reply : ENABLED

VIP State: INSERVICE

curr conns : 0 , hit count : 0

dropped conns : 0

client pkt count : 0 , client byte count: 0

server pkt count : 0 , server byte count: 0

Policy-map : L4_LB_VIP_TESTDBPVIP1

Status : ACTIVE

-----------------------------------------

Interface: vlan 21

service-policy: L4_LB_VIP_TESTDBPVIP1

class: L4_VIP_testdbpvip1-11900

loadbalance:

L7 loadbalance policy: L7_VIP_LB_TESTDBPVIP1-11900

VIP Route Metric : 77

VIP Route Advertise : ENABLED

VIP ICMP Reply : ENABLED

VIP State: INSERVICE

curr conns : 1 , hit count : 2

dropped conns : 0

client pkt count : 6 , client byte count: 328

server pkt count : 0 , server byte count: 0

If anyone knows why this isn't working... Please let me know...

Thanks

Mike

  • Application Networking
2 REPLIES
Cisco Employee

Re: Cannot get my VIP to work (New To ACE)

Mike,

I would suggest to verify that the server response goes back through the ACE module.

curr conns : 3 , hit count : 5

dropped conns : 0

client pkt count : 6 , client byte count: 384

server pkt count : 0 , server byte count: 0 <===

As you can see, ACE sees no response from the server itself.

Gilles.

New Member

Re: Cannot get my VIP to work (New To ACE)

I may have found my problem. Currently I have Layer 3 VLANS on the mfsc. I was talking to Cisco TAC and they told me I neecd to change those VLANS to layer2 and assign the IP's to the ACE (same VLANS) and use the ACE as the default gateway. I going to try and see what happens.

Thanks

Mike C.

152
Views
0
Helpful
2
Replies
This widget could not be displayed.