After upgrading our CE-565 to 5.0.5, every 70 minutes we get a syslog message like this:
Aug 18 11:33:17 DC-R-CE1 overload: %CE-BYPS-5-130007: OVERLOAD: Preload did not receive overload message. Preload may not be
The CE is configured as a transparent web-cache only. It runs currently in a trial setup with minimal load. No preload is configured. However, looking at the GUI's "usage" graph it seems that the CPU load jumps up to 50% at the same time as the error message is generated.
Re: CE-565 CPU load issue after upgrading to 5.0.5
I guess you are hitting bug CSCdz73145 . It means that the CE does not have preload configured. It usually occurs in 5.0. You may ignore it, it's a cosmetic issue and doesn't have any impact on the normal operation.
Moquery is the command line cousin of Vizore, it's very helpful and efficient sometimes during the troubleshooting. This article aims to provide moquery cheat sheet to the users for some most common seen scenarios.
Here is the checklist before customers/partners contact Cisco TAC:
Firmware Version of APIC and Switch
Download Switch and APIC techsupport logs
Problem description (Symptoms with details)
Business impact (eg, what kind of services...
moquery usageAPIC moquerySwitchmoquery
This document discuss a common issue observed during the VMM integration & VM workload migration to ACI fabric.
VMware Virtual machines are hosted in Cisco UCS-B seri...