We have a CE565 which was working fine for some time now. Since the last few weeks the ISP is complaining that the internet links are getting choked and the IP responsible for throwing huge traffic is the IP of the CE. This also happens when i dont have any client connecting to the CE...Only the public ip is configured on the CE. I wanted to use the CE just like a proxy. Can someone please help me regarding this behaviour of the CE and guide me on configuring the CE as a proxy. the current config is attached.
It is very possible someone on the outside is using your CE. We often tell customers that they need to setup ACL's on their routers to control who has access to the Content Engines. Once folks (hackers)on the outside get the ip of the CE, they can then use it for proxy, etc..
You may want to setup acls or access lists on the router to restrict what is getting to the CE.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...