Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

CE 566 issue after putting outgoing origin-server

Dear Experts ,

I have one CE 566 for my internal users . Previously we were putting ISP parent proxy , but they told us that that proxy will not be no more and you have to put the traffic to go diarectly.

I did the config, but the browsinbg is not working without outgoing proxy . Is there is anything mess up with my config ? Please help

-------------------------------

sh run

! ACNS version 5.2.3

!

device mode content-engine

!

!

hostname CE-566-Proxy2-1

!

http serve-ims text 98 binary 98

http dns-cache size 4096

http append x-forwarded-for-header

http cache-authenticated basic

http cache-authenticated ntlm

http cache-cookies

http client-no-cache-request ignore

http cache-on-abort enable

http cache-on-abort max-threshold 5000

http proxy incoming 80

http proxy outgoing origin-server

hhttp l4-switch enable

http cache-vary-user-agent enable

http smart-range enable

http destination-port allow 90

!

ftp proxy incoming 80

!

!

!

!

ip domain-name test.com

!

!

!

gui-server secure port 8080

!

https proxy incoming 80

http proxy outgoing origin-server

!

!

interface GigabitEthernet 1/0

ip address 172.16.5.7 255.255.255.0

exit

interface GigabitEthernet 2/0

shutdown

exit

!

!

ip default-gateway 172.16.5.1

!

!

!

!

no auto-register enable

!

!

!

!

ip name-server 172.17.4.13

!

!

!

!

!

!

!

!

!

!

!

!

!

!

websense-server service policy remote host 172.17.0.121

!

!

!

!

username admin password 1 *****

username admin privilege 15

!

!

!

!

!

!

!

url-filter http websense server 172.17.0.121

url-filter http websense enable

!

!

!

!

!

!

!

! End of ACNS configuration

CE-566-Proxy2-1#

1 REPLY
Cisco Employee

Re: CE 566 issue after putting outgoing origin-server

Haris,

Are your websense servers working correctly? "http proxy outgoing origin-server" is used as a fail-over mechanism if the rest of your outgoing proxies fail. I don't see any other proxies configured, so I don't see anything that would direct your outgoing traffic other then the default gateway. Is there another device intercepting the traffic?

You may want to consider looking at a newer version of ACNS, however I can't make a recommendation on the code version, and if it's working OK, you may want to stick with what you have.

Dan

123
Views
0
Helpful
1
Replies