Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

Change Primary GSSM site

Hi,

We are going to make the change of site. In this site is the Primary GSSM and two ACEs. My question is what would be the best practice to down this site.

Should I change the role of GSSM (Standby to Active) during the change of site?

Regards,

Jaime.

3 REPLIES
Cisco Employee

Re: Change Primary GSSM site

Hi Jaime,

The GSSM is only taking care of the management GUI for the GSS devices, so, unless you also plan to make changes to the GSLB configuration during the maintenance window, there is no need to force a GSSM role change.

Assuming that the ACEs in the site are configured as answers in GSS, then, you should consider suspending them from the answer group to stop new requests from being sent to them during the downtime.

Re: Change Primary GSSM site

Thanks Daniel.

I´m going to change IPs in new site. I have thought to do the following:

1. Suspend answer the site to change.

2. Connect new sites

3. Verify GSSM-Primary and GSSM-Standby

4. Make changes for new IPs (answer) in Primary GSS.

5. Activate answer

Regards,

Jaime.

Cisco Employee

Re: Change Primary GSSM site

Hi Jaime,

This plan looks perfect.

183
Views
0
Helpful
3
Replies
CreatePlease to create content