Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CIFS optimization not working

Hi,

I have a lab setup with 612s, 4.0.9 image. No preposition. Two central servers, one 2000 server and one 2003 server. Client is win xp at branch site. Transfering the same file from both server. Looks like the optimization is working from the 2000 server (a 13MB file takes about 1-2s), but not from the 2003 server (same file 25s). What could be the reasons?

2 REPLIES
Silver

Re: CIFS optimization not working

I think you should check if the server has a different NetBIOS name than its DNS name. Also try to hard set speed and duplex on your servers and switch/router.

Cisco Employee

Re: CIFS optimization not working

Steinar,

Check to see if the Windows 2003 server has SMB signing enabled. You can also check in the WAFS Edge service logs here:

/local1/logs/actona/RxLogging.log

Thanks,

Zach

131
Views
0
Helpful
2
Replies
CreatePlease to create content