Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco 6500 X6066 CSM Module Reporting

Hi;

Is there any tool for reporting on csm module reals/vservers etc. connections between given time periods ?

If not , may i export these values with any commands from cli ?

Thanks

Umut

Everyone's tags (3)
3 REPLIES
Cisco Employee

Cisco 6500 X6066 CSM Module Reporting

Hi,

You can use any SNMP tool to monitor CSM using SNMP MIBS.The Cisco CSM supports two Read Only MIBs: CISCO-SLB-MIB and CISCO-SLB-EXT-MIB, which are available at  ftp://ftp.cisco.com/pub/mibs/.

Traps can be sent based on real server, virtual server, and fault tolerant state changes. This is an old product and not much options are available SNMP wise.

While searching more related to this TOPIC i found a similar discussion. Kindly go through it and see if it helps you.

https://supportforums.cisco.com/thread/2024621

The CSM also allows you to confiure TCP scripts for HM and other particular tasks. Please have a look at the link below for details regarding the scripts:

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/csm/3.2/configuration/guide/scriptg.html

Regards,

Kanwal

New Member

Cisco 6500 X6066 CSM Module Reporting

Thank you for your reply.

I think we need to change load balancer infrastructure asap.

Cisco Employee

Cisco 6500 X6066 CSM Module Reporting

Hi,

Yeah they have been end of life for a while now and end of software engg support too.

Regards,

Kanwal

403
Views
0
Helpful
3
Replies
CreatePlease to create content