For current implementations of WCCP for L2 forwarding and IP Forwarding (WAAS and ACNS clients), I usually recommend SXF13 or later.
If you are using a Sup32/720 and require L2 return (depending on your WCCP client wether is supports it or not), then you have to look at the newer code for the 6500, which support L2 return in hardware. This is introduced in SXH and also supported in SXI. The exception to this would be if you are using a Sup2, and then it's supported in SXF train, where I still recommend SXF13 or later.
I know this is kind of old, but I am having trouble getting this to work with L2 on 12.2(33)SXI3. I'm using the config below and only sending one host to the proxy for testing. VLAN 100 is the VLAN connects the internal LAN to the FWSM and VLAN 3 is dedicated to proxys, both are the same VRF to allow the MSFC to route behind the firewall without bypassing it. Anything wrong with my router config?
From the 6509
ip wccp 10 redirect-list WCCPRedirect group-list ProxyPermit2WCCPGroup password 7 accelerated
interface Vlan100 ip vrf forwarding TrustedNet ip address 10.1.0.6 255.255.255.192 no ip redirects no ip unreachables no ip proxy-arp ip wccp 10 redirect out ip ospf authentication message-digest ip ospf message-digest-key 1 md5 7 ntp broadcast client ntp broadcast standby 0 ip 10.1.0.1 standby 0 preempt
interface Vlan3 description Proxy net ip vrf forwarding TrustedNet ip address 10.0.0.50 255.255.255.240 no ip redirects no ip unreachables no ip proxy-arp ntp broadcast client ntp broadcast standby 0 ip 10.0.0.49 standby 0 preempt
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...