We are doing load balancing in cisco ACE 4710 for DHCP servers and are getting some problem.Below is the brief description:
We are having two DHCP servers under one server farm and one server is in active mode and other is in standby mode. once we are taking packet captures at cleint end, we are getting respnse from real server IP(RIP) instead of VIPand also one more interesting thing noticed is that out of 10 requests, in 2-3 requests we are getting response from VIP also but in rest of cases we are getting response from real server.
Please suggest we someone has any idea about this.
I am not aware of any document that states the ACE does not support load balancing DHCP. However, if the ACE did support DHCP load balancing, it would be clearly documented on how to configure it.
If you or your customer require DHCP load balancing, I recommend that you reach out to your Cisco Account Mananger or Cisco SE. That person can submit a Product Enhancement Request on your behalf with engineering to add this functionality.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...