Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco ACE 4710 - Local Triangulation

Hi to all,

I need to balance some servers in same network and same VLAN of cisco ace and servers has configured a loopback interface with Virtual IP configured IP.

In logical way configuration is following

10.168.200.250 -- ACE -- Server1 (lo0 - 10.168.200.250 eth0 - 10.168.200.14)

                                  -- Server2 (lo0 - 10.168.200.250 eth0 - 10.168.200.15)

Is feasible for ACE Appliance this configuration?

2 REPLIES
Silver

Re: Cisco ACE 4710 - Local Triangulation

You want to do "direct server return" right ?

Yes it's possible; disable normalization also.

here is the full config.

http://snippets101.blogspot.fr/2008/08/asymmetric-server-normalization-on.html

New Member

Re: Cisco ACE 4710 - Local Triangulation

Yes radware calls local triangulation. I have found it on server load balance guide after posting it cisco calls it ASN.

Thanks!

992
Views
0
Helpful
2
Replies
CreatePlease login to create content