Currently we have a Cisco ACE 4710 doing a lookup for an image on a website to determine whether the site is available or not. Is there any way to get the ACE to query the server (probably using SNMP) and failover if the server's processor stays above 90% for more than 5 minutes?
You can configure SNMP based probes for checking processor utilization. You need to know OID's of the processor and that should be do it. I would suggest looking at the config guide for more details. Haven't done it myself. I am not sure about the time frame of 5 minutes but you can configure a threshoold limit crossing which probe will fail.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...