Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Cisco ACE Module: Admin Context

Hi,

If the design is that all the client/server vlans, vips etc are defined in a single context without need for virtualization, should the admin context by used for all the load balancing configurations.

100% of the resources should be allocated to the admin context.

Regards.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco ACE Module: Admin Context

Yes, if you don't need virtualization, you can use the admin context for loadbalancing and assign all the resources to that context.

Gilles.

1 REPLY
Cisco Employee

Re: Cisco ACE Module: Admin Context

Yes, if you don't need virtualization, you can use the admin context for loadbalancing and assign all the resources to that context.

Gilles.

157
Views
0
Helpful
1
Replies
CreatePlease to create content