12-19-2008 01:43 PM
Hi,
What would be a resonable initial sticky percentage? I started with 5% on the following command syntax:
resource-class prod
limit-resource sticky minimum 5.00 maximum unlimited
I haven't had the opporunity to allocate my resources as needed because I do not have enough servers on the ACE environment yet. I currently have a total on three virtual context including the Admin context.
Thanks in advance,
John...
12-23-2008 02:31 PM
John,
there is no magic number.
Be aware that sticky resources can't grow.
So 5% is all you get even if you configure maximum unlimited.
I would suggest to do a 'show resource usage' to see how much you are already using.
If necessary, increase the resource.
Do you expect to grow by 20 times in the future ? 5% is only 1/20 of the resource and if you do not expect to grow, why save the resource ?
G.
12-24-2008 08:33 AM
Good point G. I do not have enough servers in the ACE environment to make an educated guess at this point, but I will monitor the sticky sessions very closely and make changes as needed.
Happy Holidays,
John...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide