We tryed without any success to get Cisco AVS 3110 FlashForwarding to work. We configured the default application classes for Flash forwarding, published config and restarted the appliance. No luck. ANy idea what could prevent Flash forwarding from Working ? I notice an header coming from our server with no-cache,no-store directive. Could that cause the problem ? If so, how do I get the appliance to override this ? Also, we are not able to get the appliance to log information to FgnStatLog so we can debug this. Is there a specific flag for LogLevel we ned to use for the logging to work properly. Our config is as follows ;
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...