I am running BOX to BOX CSS redundancy. When the CSS 1 goes down CSS 2 will take over the role and everything works as it should be but after some minutes the services die for one to two minutes. Then the come up again and remain stable.
And my second question is when i reboot the secondary css i.e CSS 2 the CSS 1 will become unresponsive for about 5 min before it take the active role.
CSS version runnin is: sg8.10 .
I am not sure if this is hitting any bug?
Any help on this would be appriciated. Thanks in advance.
Moquery is the command line cousin of Vizore, it's very helpful and efficient sometimes during the troubleshooting. This article aims to provide moquery cheat sheet to the users for some most common seen scenarios.
Here is the checklist before customers/partners contact Cisco TAC:
Firmware Version of APIC and Switch
Download Switch and APIC techsupport logs
Problem description (Symptoms with details)
Business impact (eg, what kind of services...
moquery usageAPIC moquerySwitchmoquery
This document discuss a common issue observed during the VMM integration & VM workload migration to ACI fabric.
VMware Virtual machines are hosted in Cisco UCS-B seri...