Cisco GSS and HTTPS probes

[magic-johnson]

Hi,

Anyone any ideas why we cannot get a HTTPS probe working on the GSS.

If we go to https://test.customer.com/test.aspx we can see the page with a 200 response - all good there

This is the output from the GSS. Any ideas why we're seeing Negative Probes when the page is successfully responding via HTTPS on HTTP200.

IP: 1.1.1.1
Keepalive => 1.1.1.1
SSL Version: TLSV1
Status: OFFLINE
Keepalive Type: Standard
Destination Port: 443
Https Path: "/test.aspx"
Host Tag: "test.customer.com"
Packets Sent:                  489
Packets Received:                0
Positive Probe:                  0
Negative Probe:                489
Transitions:                     1
VIP GID: 3248 LID: 51
Keepalive GID:                3249

Cheers

[Kanwaljeet Singh]

Hi,

Negative probes mean that we are not getting the response we are expecting. The best way to TS this would to take a capture and see what is going on.

Regards,

Kanwal

Note: Please mark answers if they are helpful.

[magic-johnson]

Thanks very much for the reply.

Yes that's the way we got to the bottom of it in the end.  Appreciated.

Cheers.