We are using cisco SSL module in a 6500 chassi. When we are doing performance tests the ssl module adds alot of delay. Sometimes up to 1 second. When we are doing the same tests without the ssl module we are getting normal respons time.
Every device within your connection will add some sort of delay. But maybe your tests does not have the right settings. How much is the processor load on the SSL-module? Can you change some settings in your tests?
The load is around 1% we are testing with jmeter tcp sampling. But you can see the different when you are surfing around the site using firefox/chrome/explorer so its visually diffrent. We can also see that the SSL module is changing the http packets. Chrome cant handle the new http packets firefox in some cases explorer does not care and work fine.
Moquery is the command line cousin of Vizore, it's very helpful and efficient sometimes during the troubleshooting. This article aims to provide moquery cheat sheet to the users for some most common seen scenarios.
Here is the checklist before customers/partners contact Cisco TAC:
Firmware Version of APIC and Switch
Download Switch and APIC techsupport logs
Problem description (Symptoms with details)
Business impact (eg, what kind of services...
moquery usageAPIC moquerySwitchmoquery
This document discuss a common issue observed during the VMM integration & VM workload migration to ACI fabric.
VMware Virtual machines are hosted in Cisco UCS-B seri...