Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco View Device Manager

Hi,

is there anybody who can tell me how to bring the Cisco View Device manager for 6500er up? I've installed the CVDM V.1.1 in the bootflash of my 6500er, IOS version is 12.2(18)SXF4 enterprise services. Installed java on the client is v.1.4.2_06. After launching the CVDM whithout proxy settings the windows starts gathering information, after a few seconds it stops with an error "java.lang.NullPointerException". This failure appeared with Mozilla 2.0.0.8 and IE 6.0, on the 6500er all vty lines are idle. Is anybody here who can help to solve the problem?

4 REPLIES
Silver

Re: Cisco View Device Manager

The CVDM is not supported on the Supervisor 32 engine.

With Supervisor 720, the workaround is to downgrade the Cisco IOS? Software Release to 12.2(18)SX

New Member

Re: Cisco View Device Manager

Meanwhile i've received a patch for the CVDM, now it works fine, thank you.

New Member

Re: Cisco View Device Manager

Hi,

I am having the same problem. You mention that you received a patch which fixed the problem. Can you tell me what this patch is & where I can download it from.

Thanks. . .

New Member

Re: Cisco View Device Manager

Here the text from the readme file; try to get the zip-file via the Bug-Id:

09-December-2005

This patch provides fix for the following bug:

CSCsc10956 - CVDM 1.1 does not work with 12.2(18)SXF

SUPPORTED IOS VERSION:

----------------------

12.2(18)SXF

SIZE:

-----

5,593,057 Bytes

DOWNLOADING AND MOVING FILES TO TFTP SERVER:

--------------------------------------------

cvdm-c6500-1.1-CSCsc10956.zip contains the following two files

* cvdm-c6500-1.1.tar and

* cvdm-c6500-1.1_K9.tar (for Cisco IOS Cryptographic software)

Unzip cvdm-c6500-1.1-CSCsc10956.zip and copy one of the tar files to a TFTP server

Make sure to enter filenames exactly as they appear; (filenames are case-sensitive).

TRANSFERRING FILES TO YOUR SWITCH:

----------------------------------

Step 1 : Access the switch CLI using a Telnet connection or the console port.

Step 2 : Transfer the files from the TFTP server to the bootflash of the switch. Issue

the following command:

# archive tar /xtract tftp:// / bootflash:

where is the filename of the CVDM-C6500 tar file you want to install

and is the IP address of the TFTP server. Make sure to enter filenames

exactly as they appear (filenames are case-sensitive). Make sure you are not in

configuration mode when issuing the archive command.

Step 3 : If you are not in configuration mode, issue the following command:

# configure terminal

Step 4 : Set HTTP server and path. For example:

# ip http path bootflash:

Please refer cvdm-c6500-1_1_readme.pdf in http://www.cisco.com/cgi-bin/tablebuild.pl/cvdm-6k for

further details on CVDM-C6500.

434
Views
0
Helpful
4
Replies
CreatePlease to create content