09-04-2012 07:19 AM
Hi;
I want to use this module with Microsoft Owa infrastructure. Is there anyone to have experience on this environment ? or How can i do this ?
Thank you, best regards
Umut
09-04-2012 06:38 PM
Hi Umut,
What exactly is the requirement here? Are you looking for sample configuration? There have been few posts for CSM with OWA. Please go through them and see if you an idea. For us to help you please put in detail your requirement and we will try our best to help you.
https://supportforums.cisco.com/thread/128499
https://supportforums.cisco.com/thread/2036271
Regards,
Kanwal
09-05-2012 07:07 AM
Hi;
In fact i need sample configuration. I look at you reference links especiallyhttps://supportforums.cisco.com/thread/2036271
but i couldnt be able to implement our environment.
If i upload our csm,daughter card configuration and related ip address , could you help me to create configuration ?
Thank you, best regards
Umut
09-05-2012 02:04 PM
Hello Umut,
What is exactly the problem when you have the configuration in the CSM?
Can you send the show run of the CSM and let me know the VIP address with the issue
09-05-2012 11:58 PM
Hello Cesar;
As i say before i need to test load-balancing on owa servers if its running on csm-s module or not. I looak at related threads ant try to implement but i couldnt. So i deleted configuration.
You can find current csm and ssl card configuration in attachment.
Load balancing servers will be : 10.0.1.224 and 10.0.1.225
Virtual ip will be: 10.0.1.228
i will be very appreciated if you help me to create config. I can handle certificate side.
Thank you
Best regard
09-06-2012 01:09 PM
Hi,
Here is a basic configuration for SSL Termination with a CSM-S
vlan 112 client
ip address 10.198.16.78 255.255.255.192
gateway 10.198.16.77
natpool HTTPS 10.198.16.106 10.198.16.106 netmask 255.255.255.192
vserver TEST
virtual 10.198.16.124 tcp https
serverfarm SSL
persistent rebalance
inservice
serverfarm SSL
no nat server
no nat client
real 10.198.16.79 local
inservice
--------------------------------------------------------------------------------------------
ssl-proxy vlan 112
ipaddr 10.198.16.79 255.255.255.192
gateway 10.198.16.78
admin
ssl-proxy service test
virtual ipaddr 10.198.16.124 protocol tcp port 443 secondary
server ipaddr 10.198.16.116 protocol tcp port 80
certificate rsa general-purpose trustpoint Digi-Int
inservice
---------------------------------------------------------------------------------------------
vserver TEST2
virtual 10.198.16.116 tcp www
serverfarm TEST
persistent rebalance
inservice
serverfarm TEST
nat server
nat client HTTPS
real 10.198.16.92
inservice
09-07-2012 12:52 AM
Hello Cesar;
Thank you for your support. I'll implement and inform you as soon as possible.
Best regards
Umut
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide