Re: CMS status offline:is apllication acceleration/optimization
CMS being enabled is not needed for optimization, however it's needed for new configuration pushes from the CM and statistical reporting to the CM.
If you are running 4.0 and your WAE is a older version of WAAS then your CM, upgrade it to the same version or newer then the CM. In 4.1, the CM needs to be the higher version, but in 4.0, it needs to be the lower version (4.0.17 verses 4.0.21, etc.).
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...