first make class maps to characterize the traffic:
class-map type http loadbalance match-all ten 2 match source-address 10.0.0.0 255.0.0.0 4 match http url .*
class-map type http loadbalance match-all seventeen 2 match source-address 18.104.22.168 255.255.0.0 4 match http url .*
class-map type http loadbalance match-any restrict 2 match http url /public.* 4 match http url /downloads.*
then use in load balance policy as follows:
policy-map type loadbalance first-match WEBSERVER_L7
if you want to send outside users with other urls to a sorry page you would have a server in a serverfarm taht would do that and use it in a class class-default on the bottom of the load balance policy. The matches on load balance policy are top down so order is important.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...