Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

commit_VipRedundConfig problem.

I have problem to sync configuration from master to backup.

CSS11506# commit_VipRedundConfig "-d"

CSS11506#

Checking available disk space on systems ...

Checking the disk space locally before continuing with the script.

Verifying that another local session is not running the script.

Creating script/vipr_config_sync_lock file.

Verifying app and redundancy configs ...

Verifying that app session is up with backup switch.

Making sure app session is up.

Seconds to wait before calling it quits: 60

Checking the disk space remotely before continuing with the script.

Checking local and remote switch versions ...

Storing the running code versions of the local and remote switch.

Storing the local switch's version.

Retrieving the remote switch's version.

Checking remote version for 4.0

Checking if switch is BACKUP for any virtual routers and if

the state is 'No Service'.

Checking vip redundancy state ...

Working ...

Checking if backup switch is Master for any VRIDs.

If it is, either a local interface that once held redundant vips

has been removed or the Backup is a Master for another vip-redundant

relationship.

Checking remote redundant vips ...

Saving Master running-config to startup-config and archiving startup-config.

Copying running-config to startup-config.

Archiving startup-config.

Swapping Master and Backup ip addresses in tmp.cfg for app

and redundancy interface.

Error in script playback line:1500

>>>function REPLACE_TEXT call "tmp.cfg localIp backupIp 0 SUB_STRING_IP"

CSS11506#

Script Playback cancelled.

could anyone advice me what problem I got?

Any comments will be appreciated

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions

Re: commit_VipRedundConfig problem.

It looks as if your APP session is not UP. You can use "show app session verbose" command to verify that.

You also need to check if you are not using Management IP as the APP session IP.

Hope it helps

Syed Iftekhar Ahmed

2 REPLIES

Re: commit_VipRedundConfig problem.

It looks as if your APP session is not UP. You can use "show app session verbose" command to verify that.

You also need to check if you are not using Management IP as the APP session IP.

Hope it helps

Syed Iftekhar Ahmed

Community Member

Re: commit_VipRedundConfig problem.

Hi Syed

Great thanks for reply, I must miss it out.

# sh app session verbose

App Session Information 'no hostname':

Session ID: 8a3bf9c0 IP Address: 10.1.1.92 State: APP_SESSION_UP

Local Address: 10.1.1.91 rcmdEnable: Enabled

KalFreq: 14 Auth Type: none Encrypt Type: none MaxFrameSz: 10240

Pkts Tx: 543679 Pkts Rx: 543694 Pkts Rej: 0

Last UP event:AUG 2 22:21:34

FSM Events:

STOP: 0

INIT: 1

OPEN: 1

AUTH: 1

UP : 1

DOWN: 0

Attached Apl: 0xa03055c

Attached Apl: 0x20206e00

The APP session IP is the management IP. So, looks it is wrong to use management IP. do I have to use a interface specially for APP?

Please advice.

161
Views
0
Helpful
2
Replies
CreatePlease to create content