Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

conditional load-balancing

I need to load-balance traffic to serverfarm through VIP 0.0.0.0/0 TCP 80, including fragments associated with this traffic.

All the traffic that doesn't match the VIP should be routed.

I've configured the following VIP:

vserver PROXY2_PLS_80

virtual 0.0.0.0 0.0.0.0 tcp www

vlan 921

serverfarm PROXY_WAP2_PLES

sticky 15 group 30

replicate csrp sticky

replicate csrp connection

no persistent rebalance

inservice

May I assume that traffic that doesn't match the VIP will be routed?

Thanks for your help

Francois

3 REPLIES
Cisco Employee

Re: conditional load-balancing

the csm does not route by default.

You need to use the following config to make it route.

serverfarm route

no nat client

no nat server

predictor route

!

vserver route

virtual 0.0.0.0/0

serverfarm route

no persist rebala

inservice

Gilles.

Community Member

Re: conditional load-balancing

May I assume that the serverfarm "route" and vserver "route" must be configure in addition of the serverfarm "PROXY_WAP2_PLES" and vserver "PROXY2_PLS_80"?

And furthermore, may I assume that by default the fragmented packets will be correctly forwarded either to the serverfarm "PROXY2_PLS_80" or to the serverfarm "route" according to the traffic flow they belong to?

Thanks for you reply

Cisco Employee

Re: conditional load-balancing

that's correct.

226
Views
0
Helpful
3
Replies
CreatePlease to create content