Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Configuring CSM and SSL module on Catalyst 6506

Hi there,

i need some help with the following scenario.

Catalyst 6506 with CSM and SSL module.

We want to balance https traffic. Solutin has to be end to end traffic encryption, thus, form client to physical servers.

I have check doc and find doc

http://www.cisco.com/application/pdf/en/us/guest/products/ps708/c1581/ccmigration_09186a00804411e3.pdf

where scenaroi is described in pa b16.

I 'm a little confused since it seems to me that some configuration issues are missed or assumed,

Could anybody clarify scenario & conf ?

Thx a lot

1 REPLY
New Member

Re: Configuring CSM and SSL module on Catalyst 6506

We are trying to balance HTTP & HTTPS traffic to teh same physical servers.

WWW load balnace is working but not https.

Vip is the same for both kinds of traffic.

The main issue is that hhtps traffic has t reach physical servers in encrypted mode.

Thus a 2 ways decryption/encryption process has to take place between CSM & SSL modules.

We ha checked and https traffic reaches server, but the reply does not reach the client.

Can anybody help ?

Atthachments are available (csm.txt and ssl.txt)

107
Views
0
Helpful
1
Replies
CreatePlease to create content