Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configuring PBR on the SSLM?

Hi Giles,

Couple of questions on PBR:

Our SSL Module is currently working with the CSM for load balancing to server farms.

1. Given the current configuration (above), is it possible to configure the SSL Module to work in a standalone (PBR) fashion as well? - As such, have the TWO setups working at the same time, each coming into play depending on whether the "real server" is farmed (via the CSM), or whether PBR is needed, i.e the real server is not farmed.

2. Cisco's SSL Configuration Guide is very limited on examples or information on how the SSLM should be configured for PBR - are there any useful examples that you can point me to?

thanks

Sheldon

2.

1 REPLY
Silver

Re: Configuring PBR on the SSLM?

It is possible to use PBR with the SSL module. You will find examples of configuring policies on the SSL at the following URL.

http://www.cisco.com/en/US/products/hw/switches/ps708/module_installation_and_configuration_guides_chapter09186a0080441265.html

98
Views
0
Helpful
1
Replies