Hi Giles,
Couple of questions on PBR:
Our SSL Module is currently working with the CSM for load balancing to server farms.
1. Given the current configuration (above), is it possible to configure the SSL Module to work in a standalone (PBR) fashion as well? - As such, have the TWO setups working at the same time, each coming into play depending on whether the "real server" is farmed (via the CSM), or whether PBR is needed, i.e the real server is not farmed.
2. Cisco's SSL Configuration Guide is very limited on examples or information on how the SSLM should be configured for PBR - are there any useful examples that you can point me to?
thanks
Sheldon
2.