Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Confirming Sticky rule applied or not

when I apply sticky rule on contents rule,

How can I confirm it applied or not for specific user(Ip address)?

5 REPLIES
Cisco Employee

Re: Confirming Sticky rule applied or not

what kind of sticky rules ?

what type of content rules ?

What do you mean by confirm ?

What do you want to see or expect to see ?

Gilles.

Community Member

Re: Confirming Sticky rule applied or not

content WWW

add service test2 weight 1

add service test1 weight 2

balance weightedrr

vip address 100.100.100.100

advanced-balance sticky-srcip

sticky-mask 255.255.255.0

active

By above rule, client contact test1 at first then next connection should be on test1.

But for some client loadbalanced by weightrr at every connection then what will be the problem, and how can I find out weightrr rule applied instead sticky-srcip rule?

Cisco Employee

Re: Confirming Sticky rule applied or not

I forgot to ask what software version.

finally, the best way to troubleshoot this is a simultaneous sniffer trace front-end and back-end.

You could also capture a 'sho sticky-table' several times from the debug mode.

But the information there is based on a hash value.

So, you an't easily determine which entry you will hit.

Gilles.

Community Member

Re: Confirming Sticky rule applied or not

Thanks.

My device and software version are CSS 11506 and 7.1 B109s .

By the way, If I find an ip address which isn't applied sticky-srcip rule but load balanced, then What shall I do?

Frankly speaking, from server-side log I found an Ip address which isn't loadbalanced applied sticky-srcip rule but loadbalanced.

, then what are the datas I should take to open case ?

Cisco Employee

Re: Confirming Sticky rule applied or not

the sniffer trace, the config and the 'sho sticky-table'.

A 'flow active' from debug mode should also be usefull.

This information should be captured at the time of the problem.

Gilles.

134
Views
0
Helpful
5
Replies
CreatePlease to create content