I am network administrator in a big company, the case is as follows:
I have a new Content Engine 590 and I want not to use wccp, I will buy a new cisco L4 switch and want to use it with the engine, some one told me that it is not supported by my engine, is that true or not???
I have a cisco router and I can use wccp but papers from different web sites writes that L4 switching performance is better, is that true???
The feature is code-specific, and the content engine will support L4 switch forwarding. You might want to look at this document to see the sample configuration for this. If you scroll passed the CSS config you will see what the CE configuration will look like.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...