Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

content services switch 11500 series

Hi,

Could someone help me with commands to configure load balance ( content & service commands) FTP traffic to our Bluecoat proxy boxes. I have already configured the Bluecoat to intercept FTP traffic. Now I just want to divert the traffic from CSS.

Thanks

Mathew

Everyone's tags (4)
1 REPLY
Bronze

Re: content services switch 11500 series

Hello Matthew-

Here is a link explaining how to setup FTP on the CSS:

http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a0080094967.shtml

There are 2 types of FTP, active and passive.  There is a good document that explains the 2 different modes of FTP here:

http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_tech_note09186a0080093df0.shtml

Basically, all you need is a content rule that matches port 21 that has "application ftp-control" under that rule - and the services that are under the rule need to be in a group so source nat is done.

Regards,

Chris Higgins

348
Views
0
Helpful
1
Replies
CreatePlease to create content