Re: Content Switch Load Balancing and Failover Groups
There's no direct method that I know of that will do what you're wanting to do. However, you might try implementing one primary VIP with www1,www2, and www3 as services, with a redirect service as the primarySorryServer. With that redirect service you could redirect the clients to another VIP containing www4, www5 and www6. The redirect sorryserver would only be invoked if *all three* of the first webservers were down or suspended. Once any one of them becomes available then traffic will no longer be sent to the "failover" VIP via the redirect.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...