After trying to tftp or ftp here is the below message.
SLB-1/Admin# sh ver
Cisco Application Control Software (ACSW)
TAC support: http://www.cisco.com/tac
Copyright (c) 1985-2008 by Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
loader: Version 0.95.1
system: Version A3(2.0) [build 3.0(0)A3(2.0) adbuild_17:35:22-2008/10/01_/a
uto/adbu-rel4/rel_a3_2_0_dev_build/REL_3_0_0_A3_2_0]
system image file: (hd0,1)/c4710ace-mz.A3_2_0.bin
Device Manager version 1.1 (0) 20080805:0415
installed license: no feature license is installed
Hardware
cpu info:
Motherboard:
number of cpu(s): 2
Daughtercard:
number of cpu(s): 16
memory info:
total: 6226392 kB, free: 4628964 kB
shared: 0 kB, buffers: 3040 kB, cached 0 kB
cf info:
filesystem: /dev/hdb2
total: 861668 kB, used: 536400 kB, available: 281496 kB
last boot reason: reload command by admin
configuration register: 0x1
SLB-1 kernel uptime is 0 days 1 hours 10 minute(s) 6 second(s)
########################################################################
SLB-1/Admin# copy image:c4710ace-mz.A3_2_0.bin ftp://10.11.20.28
Enter the destination filename[]? [c4710ace-mz.A3_2_0.bin]
Enter username[]? admin
Enter the file transfer mode[bin/ascii]: [bin] bin
Enable Passive mode[Yes/No]: [Yes] yes
ftp: connect: Connection refused
Not connected.
Not connected.
Not connected.
Passive mode on.
Hash mark printing on (1024 bytes/hash mark).
Not connected.
SLB-1/Admin#
