Not without interrupting service. If you can interrupt service, the cleanest way is to get the startup-config files from both boxes and cut and paste the data you want from one file to the other. Then transfer the startup-config file back and reset.
You COULD try coping the new startup-config to running-config, but that still causes a (shorter) service interruption.
To add new services without interruption, you are stuck with the interactive configuration and the y/n prompt, to the best of my knowledge.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...