Couldn't bring up a switch Port-channel connecting to WAVE-574
I'm connecting WAVE-574's two GigE ports to two GigE ports on the switch. The WAVE-574 is running WCCP (the inline adapter is not in use). Two switch ports are in a Port-channel, and two WAVE-574 ports are also configured in Port-channel. I have tried "auto/auto" on those ports, and "1000 full" too. Either case, the port-channel interface on the switch is always "down down", while both switch ports are "up up", and the WAVE-574 Port-channel and GigE ports are also showing up.
What can be the issue here? I have used the same config on between a WAE-674 and a 10/100 switch, the port-channel on the switch is just fine.
Re: Couldn't bring up a switch Port-channel connecting to WAVE-5
Thanks for the reply. I have not made it work yet. I have tried setting ports to auto-sensing or static "1000, full-duplex". Either case, the switch port-channel is "down down", while the WAE port-channel is shown as "UP".
Right now, looks like only one GigE port in the channel is actually carrying traffic.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...