Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CPU% of CSM module

Hi everybody,

Do you know how can I understand the CPU utilization on the module CSM?

I use the comand: show mod csm all tech-s util, but I am not able to understand the real % of utilization like "show process cpu".

Could you help me?

Thanks

Ira

3 REPLIES
Silver

Re: CPU% of CSM module

I would suggest that you use the "Show processes cpu" command. This command work on the CSM modules as well.

New Member

Re: CPU% of CSM module

but there is no snmp oid for thes cpu values

Cisco Employee

Re: CPU% of CSM module

There are 6 processors in the CSM.

5 IXP's and 1 PPC.

Each IXP total CPU are given at the bottom of the show commands.

The PPC CPU is always running at 100% - this is normal.

The PPC divides the cpu between all the processes.

What you get at the top is a list of all the processes.

You have to make sure each ixp is not constantly running above 60%.

For the PPC, there is not much to monitor.

Gilles.

217
Views
4
Helpful
3
Replies