We have an environment where the traffic only originates from two source IP addresses (shared port forwarders). The server group need a 12 hour stickiness window for the Citrix sessions to be hitting the same server.
If we have two servers, ServerA and ServerB, this is the problem.
When maintenance is performed on ServerA. All traffic is sent to ServerB. When ServerA is back in operation the traffic does not use this server due to the sticky timeout of 720 minutes.
Is there anyway to clear the connections from one source on the CSM so the processing of packets will spread the load between the two servers?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...