Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CSM bug

CSCsk43903 -A pair of CSMs configured for fault tolerant operation will both enter the active state after 828 days, causing VIPs to be inaccessible. Fixed in 4.2(7).

I came across this bug which thankfully happened on a Sunday!

It's not clear wether the CSM requires rebooting to work around this bug before the 828 days expire or the switch chassis. Certainly the sh ver output from the switch showed exactly 828 days when I came across this problem.

I gather it's the CSM that requires rebooting, just want to be certain, anyone know? I have another pair of CSM's that come up to the 828 day limit(I'm not upgrading the code as yet, these CSM's will be replaced shortly)

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: CSM bug

This is a CSM issue.

So only the CSM needs to be rebooted.

BTW, there is a similar problem with probes as well.

Gilles.

1 REPLY
Cisco Employee

Re: CSM bug

This is a CSM issue.

So only the CSM needs to be rebooted.

BTW, there is a similar problem with probes as well.

Gilles.

498
Views
0
Helpful
1
Replies