I have clients and servers that are outside of the vlans that are the defined ones for CSM. I am using a client NAT pool that is part of the server side address space and server NAT. I see in a packet capture that the server is replying to pings to one of the NAT pool addresses. The ping does not get back to the client. The CSM is acting like it is not listening to traffic for the client NAT address. I saw an article that talked about "Secure router mode" and doing "IP SLB MODE CSM". I am not in that mode. Do I need to be and what effect will that have on my current load balanced servers?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...