How we can place CSM in Cat6500 switch ? I've a server which is placed in the Cat 6500 switch. Now i want to achieve the Server load balancing by using CSM Module. Can anyone help me out the solution ?
I am looking for step by step procedure to add CSM in the switch as well as Server load balancing in CSM ?
I just read that pdf and it is great. One question that it doesn't answer. Can your CSM config do both bridging mode and routing mode at the same time?
I have a client side vlan 101 and two server side vlans, 903 vlan one set of load balanced servers and 905 for another set of servers. Each vlan is a different application.
Everthing is set up in router mode right now.
I am interested in trying out bridged mode with one set of servers but not all of them. My understanding is that I can place my servers in a L2 vlan and then on the CSM give it the same IP as the client side vlan so they are bridged together. Would doing this set my vlan 905 in bridged mode but leave my vlan 903 in routed mode?
ok, I have tried to configure the bridge mode & it is half working. I configured my client & server side vlans with the same IP address. my reals are in the same subnet as the client vlan and the same vlan where my Virtual server is (VIP). My servers, which sit in the server side vlan have IPs in the client side subnet range and I can get to those just fine. However, my VIP is not comming up. It is not pingable or anything. However, I can ping the reals and the csm shows that the vserver is operational. If that was the case, I would assume that we would be able to ping the VIP.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...