10-19-2006 04:21 AM
Hi all,
I have tried with my normal blue console cable , 9600 and hyperterminal. No success! Is the consoleport at CSM-blade something else?
Regards
Mats
Solved! Go to Solution.
10-20-2006 07:21 AM
10-19-2006 05:32 AM
Your best bet is to use the 6500 console port. The RJ-45 connector, which is covered by a removable plate, is used to connect a management station device or a test device. This connector is used by field engineers to perform testing and to obtain dump information.
HTH
10-19-2006 11:04 PM
Hi,
I want to obtain dump information with commands I have been given from Gilles Dufour.
Mats
10-20-2006 12:37 AM
Mats,
use a normal ethernet cable [pc to switch type of cable]
Gilles.
10-20-2006 04:38 AM
Gilles,
I'm sorry to bother you but do you mean that I shall connect the cable between csm consoleport and ethernetport on a PC? What application shall I use and how do I connect? Telnet to 127.0.0.50 port 23?. I tried to connect console and ethernetport on PC but no link up was the result. Tested with straight and crossed.
Regards
Mats
10-20-2006 07:21 AM
use the console port of your pc but use an ethernet cable.
Gilles.
10-24-2006 02:55 AM
Yes,
Now its working.
Thanks a lot.
Regards
Mats
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide